The heart of the Flatline Pro is the frame. The geometry, the material, the feel, and the way it reacts under the rider are the very essence of the ride. That’s why we’ve introduced FORM™ – the design and manufacturing process of our high-performance frame tubing. Our philosophy behind FORM™ tubing is to push the limits of tube and frame design to create the frame’s unique riding feel.
- Linearly Rising LC2R suspension rate is tuned for freeride and downhill racing; suspension progression is inherent to the linkage design, not the shock absorber.
- Concentric to the main pivot point, chain and brake forces eliminate pedal “bob”; suspension is stable during pedaling, and “platform” pedaling is inherent to the suspension design – not the shock.
- Counter rotating top link creates a more laterally stiff Swingarm for increased control in tight corners, and the occasional sideways landing.
- The counter rotating link along with the kinked down tube allow for a low and center positioning of the shock absorber in the frame. This low-slung concentrated mass allows the bike to rotate in any direction faster than if the center of mass was positioned higher in the frame.
- Oversized double-row angular contact bearings increase bearing life, and allow for a less expensive bearing to be used. (more affordable for retail level replacement)
- Triangulated Swingarm maximizes suspension strength, while keeping its weight to a minimum.
- Tuglinks (as opposed to thrustlinks) increase suspension sensitivity to very small bumps, further aiding in smoothing out the trail.
